tongue and groove roof decking boards

2 x 6 TIMBER DECKING - Structural Wood Systems 2 x 6 Solid Timber Decking by Structural Wood Systems (SWS) provides the American Institute of Timber Construction standards for tongue-and-groove heavy timber decking. S.P.I.B. No. 1 Grade lumber decking is standard and is used where construction To determine the board footage of decking required, multiply the.

The Long and Short of Wood Roof Systems - WoodWorks 9/30/2014. 10. Wood Roof Sheathing Options. Wood Structural Panels. Oriented Strand Board (OSB) and Plywood. Solid Sawn Decking. 2x, 3x and 4x dimensional lumber. Mechanically Laminated or Tongue & Groove. Panel Products: Structural Insulated Panels (SIPS). Cross-Laminated Timber (CLT) 

2x6 and 3x6 Tongue and Groove Roof Decking - materials - by 2x6 and 3x6 Tongue and Groove Pine Roof Decking - Direct from the manufacturer! 2x6 #1 Select Face T&G-V = $0.95 per running ft 3x6 #1 Double T&G-V = $2.15 per running ft (We sometimes have

Tongue and Groove Decking The Building Code Forum Does anyone have experience using tongue and groove decking for roof sheathing? IRC Table We also knew that T&G or ship lap wall or roof sheathing was a better diaphragm than just loose boards, how much better was though to get your arms around, there were so many variables. Diagonal T&G or 

Tongue and Groove Roofing – Romtec Inc. Romtec uses tongue and groove (T&G) timber decking as the standard roof decking material on every building. T&G roof Comparing apples to apples, T&G decking typically has a higher cost than plywood or oriented strand board (OSB), but the increased strength of the material increases the allowable PSI for the roof.

Wood Decking - Buildipedia Wood Decking are structural boards or planks, which are attached to joists, beams, rafters or trusses, that form a floor or roof surface. The edge detail on tongue and groove decking may be V-groove, eased, squared, beaded or custom milled. Wood bridges, intended for light traffic, also utilize wood 

Deck Preparation Dayus Roofing These boards are fastened horizontally to the trusses with slight gaps between each board. Older residential roofs often feature the 1X6 boards, which meet in tongue-in-groove joints. Tongue-in-groove decking is necessary when the ceiling is exposed and the underside of the decking is visible from below or inside the 

Roof Sheathing - Free-Ed.Net Where flat roofs are to be used for a deck or a balcony, thicker sheathing boards are required. Board roof The boards are nominal 1 inch by 8 inches and may be square-edged, dressed and matched, shiplapped, or tongue and groove. When tongue-and-groove boards are used, joints may be made between rafters.

Pine Tongue And Groove Roof Decking Houzz Browse 279 photos of Pine Tongue And Groove Roof Decking. Find ideas and inspiration for Pine Tongue And Groove Roof Decking to add to your own home.